Medium-heat panel for industrial halls and storage rooms

KLP medium-heat panel

KLP medium-heat panels give warmth to industrial halls and storage rooms. Conserve energy with radiant heating.

Heating based on infrared radiation is an effective and economical heating solution. Infrared radiation can be targeted at the places where it is truly needed and the temperature can be flexibly adjusted with a suitable control system. Medium-heat panels are excellently suited for high hall and storage spaces. Other usage sites are workshops, workspaces, washrooms, draught lobbies, sports halls and shops.

Structure:
The medium-heat panel consists of two separate heat radiators formed by a heat resistor and aluminium panel. Heat is blocked from radiating upwards with the help of effective heat insulation. The body of the heater is made of powder painted aluzinc steel. Both ends of the heater have brackets for attaching.

Installation:
The heater can be attached to the ceiling or a lamp suspension rail using the installation brackets. The heaters must be installed horizontally to prevent air circulation. During installation, pay attention to the minimum distances to the wall, furniture and combustible materials. The installation height of the heating panel must be at least 1.7 m; the recommended height is over 3.5 m. The electrical connections can be hooked up only by an authorised electrician.

Controls:
The heater group can be controlled either with a separate switch or a thermostat. In industrial spaces, programmable electronic controls are recommended. This way, the heat stays stable and peak power levels can be levelled throughout the day.

EPS medium-heat panel

A compact heating solution for industrial halls and storages. Conserve energy with radiant heating. Heating based on infrared radiation is effective and economical.

Infrared radiation can be targeted at the spots where it is most needed and the temperature can be controlled flexibly with a suitable control system. Medium-heat panels are excellently suited for high halls and storage spaces. Other usage sites include workspaces, workshops, washrooms, draught lobbies and shops.

Structure:
The EPS medium-heat panel consists of a heat radiator formed by the heat resistor and enamelled sheet plate. Heat radiation upwards is prevented with the help of a reflector and efficient heat insulation. The body of the heater is made of aluzinc sheet plate. Both ends of the heater have brackets for attaching.

Installation:
The heater can be attached to the ceiling or a lamp suspension rail using the installation brackets. The heaters must be installed horizontally to prevent air circulation. During installation, pay attention to the minimum distances to the wall, furniture and combustible materials. The installation height of the heating panel must be at least 1.7 m, the recommended height is over 3.5 m. The electrical connections can be hooked up only by an authorised electrician.

Controls:
The heater group can be controlled either with a separate switch or a thermostat. In industrial spaces, programmable electronic controls are recommended. This way, the heat stays stable and peak power levels can be levelled throughout the day.